Make Selections Below




Installing a Diesel? Carburetor? FiTech? Megasquirt? AEM? Haltech? Honda Engine? 2JZ?

The CPW Vehicle Integration Harness will take the headache out of keeping your stock gauges and other vehicle functions with your swap.

The available options provide selections from our current online offerings of this harness style for the F-Body Car. Our typical configuration leaves the ECM in the stock location under the hood.

Custom orders can be built if your installation does not fall under the above selections.

All F-Body Vehicle Integration harnesses include wiring for A/C, Starter, factory gauges, and ABS. All factory functions of the car can be retained with this product.

The Stock vehicle ECM will need to be retained in some cases to make use of all the functions provided in this harness.

This harness does not contain any engine or transmission control functions.

Vehicle Integration Harness for 1994-2002 Camaro, Firebird, Trans-Am

The CPW Vehicle Integration Harness is intended as a general purpose harness that will allow you to install any type of engine or engine control system in your vehicle, and not have to worry about tracking down the wires in the car needed to maintain function of the stock gauges, starter, A/C, Fuel pump, etc.

This system includes wiring for:

  • Body connections with power and grounds for vehicle fuse box and interior
  • Speedometer
  • Tachometer
  • Oil Pressure gauge
  • Coolant Temp gauge
  • Fuel Level gauge
  • Check Engine light
  • A/C
  • E-Fan Controls
  • Starter
  • ABS
  • Brake Switch signal
  • Backup Lights (Manual Trans)

* The wiring to make these systems function is provided, but if your ECU and/or engine being installed does not provide the proper signals to the provided wiring, then there is no guarantee these functions can be maintained.

Additional information

Weight 6 lbs
Dimensions 8 × 8 × 6 in

WARNING: Cancer and Reproductive Harm.